Mitsubishi PLC Programming Replacement Cable USB SC09
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.

Functions

• Support USB-SC09 operating system: Windows2000/XP(WinNT4/95/98/Me/DOS not support )
•  Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
• Fully compatible with USB V1.1 norms and USB CDC V1.1
•  USB-bus powered, with current consumption of 50 mA
•  Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
• Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
• Each PC only supports one USB cable programming
• Working temperature: -20 ~ +75 C
• Color: black

USB/RS422 interface,adapter for Mitsubishi FX2N/FX1N/FX0/FX0S/FX1S/FX3U series PLC,2.5 meters,with communication indicator, the largest communication distance of up to 2 kilometers. Compatible with FX-USB-AW.

Summary:

USB-SC09-FX is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for all FX series Mitsubishi PLC (including the old products FX2/FX2C).
 

Features and technological index:
 

1. Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.
2.  Fully compatible with USB V1.1 norms and USB CDC V1.1
3. USB-bus powered, with current consumption of 50 mA
4. Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
5. Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
6.  Support long-distance communications, the largest communications is two kilometers (9600 bps)
7. Each PC only supports one USB cable programming
8. Working temperature: -20 ~ +75 'C
9. Cable length: 2.5m; Color: black

Usage:

USB device drivers should be installed before using USB-SC09-FX programming cable.

After completing Driver installation, the corresponding COM port for the USB-SC09-FX programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

 RS232/RS232 interface,cable for Mitsubishi Q series PLC,3 meters.Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose  QC30R2+

Support

Feel free to contact us via Email or the following ways.

When will product ship?

We will ship your order within 1~2 days after we receive it.
It usually takes 2~7 days before you are able to check the logistics information in system.
Shipping may be delayed on China holidays and Sunday.

FX-232CAB-1 F940 930 GT1000 GT11 Touch Screen Programming Cable AC30R2-9SS

Support

Feel free to contact us via Email or the following ways.

When will product ship?

We will ship your order within 1~2 days after we receive it.
It usually takes 2~7 days before you are able to check the logistics information in system.
Shipping may be delayed on China holidays and Sunday.