あなたのカート
カートは空です
Kinco CD622-AA-000 servo drive, brand new and original in stock, 18 months warranty
Servo drive CD622-AA-000
- Supports dual pulse (CW/CCW), pulse direction (P/D) and A/B phase control
- With a variety of protective measures such as overvoltage, overcurrent, and overheating, it is safe and reliable
- Use your own operation panel or PC debugging software to easily complete debugging
- Up to 300% overload capacity
- High response frequency, speed loop bandwidth up to 600Hz
- With a variety of control modes and gain automatic adjustment functions, it meets the needs of most applications (among which CD2 also supports the following two features).
- Support dual pulse (CW/CCW) mode, pulse direction (P/D) mode and incremental encoder (AB) mode control.
- Support wide voltage input (3.3~ 24VDC).
basic parameters
| power supply | Three-phase AC380V-20/+ 15% 47~ 63Hz |
| logic power supply | 18VDC~30VDC 1A |
| Maximum continuous output current (rms) | 7A |
| Peak Current (PEAK) | 25A |
| feedback signal | 2500PPR (Incremental Differential 5V Encoder) |
| Energy consumption braking | Requires an external braking resistor (depending on the operating conditions, mainly used in sudden stops) |
| Energy consumption braking voltage absorption point | DC680V±5V |
| Overvoltage alarm voltage | DC700V±5V |
| Undervoltage alarm voltage | DC400V±5V |
| cooling method | air cooling |
| weight | 2.4kg |
| Maximum input pulse frequency | Differential transmission mode: 500KPPS, open collector transmission mode: 200KPPS |
Position control mode
| Pulse command mode | Pulse + direction, CCW + CW, A phase + B phase (5V-24V) |
| command smoothing | Low-pass filtering (internal parameter setting) |
| Advance payments increased | internal parameter setting |
| Electronic gear ratio | Set range: Gear factor: -32768~32767, Gear divider: 1~32767, 1/50≤ |
| Position loop sampling frequency | 1KHz |
| Analog input voltage range | -10V~+10V (12-bit resolution) |
| Input impedance | 200K |
Speed control mode
| Analog input sampling frequency | 4KHz |
| Command control mode | External analog instructions/internal instructions |
| command smoothing | Low-pass filtering (internal parameter setting) |
| Input voltage dead time setting | internal parameter setting |
| Input voltage offset setting | internal parameter setting |
| speed limit | internal parameter setting |
| Torque limit | Internal parameter setting/external analog command control |
| Velocity loop sampling frequency | 4KHz |
| Analog voltage input range | -10V~+10V (12-bit resolution) |
| Input impedance | 200K |
| Input sampling frequency | 4KHz |
Torque control mode
| Command control mode | External analog instructions/internal instructions |
| command smoothing | Low-pass filtering (internal parameter setting) |
| speed limit | Internal parameter setting/external analog command control |
| Input voltage dead time setting | internal parameter setting |
| Input voltage offset setting | internal parameter setting |
| current loop sampling frequency | 16KHz |
Digital input and output function
| input specification | 7 digital inputs, through the connection of the COM1 terminal, can be valid for high level (12.5~ 30V) or low level |
| input function | The functions are as follows: drive enable, drive error reset, drive operating mode control, speed loop proportional control, positive limit, negative limit, origin signal, command reverse, internal speed segment control, internal position segment control, emergency stop, start to find the origin, command activation, gear ratio switching, gain switching |
| output specification | 5 digital outputs, OUT1~ OUT4 driver capacity is 100mA, OUT5 driver capacity is 800mA, can directly drive the brake device |
| output function | Freely defined according to needs, the functions are as follows: drive ready, drive wrong, motor position to, motor zero speed, motor brake brake, motor speed to, index Z signal appears, maximum speed limit in torque mode, motor lock shaft, motor limit, origin found, multi-segment position to |
usage environment
| operating temperature | 0~40℃ |
| Storage temperature | -10℃~70℃ |
| Humidity (no condensation) | Below 90% RH |
| Protection level | IP20 |
| protection function | Overvoltage protection, undervoltage protection, motor overheating (I2T) protection, short circuit protection, driver overheating protection, etc |
| Communication interface | RS232 (Connection to PC: 2-2,3-3,5-5) |
| Installation site | Dust-free, dry, lockable (e.g. electrical cabinets) |
| Installation method | Vertical installation |
| Installation altitude | No power limit below 1000m |
| atmospheric pressure | 86kpa~106kpa |
Dimension drawing (mm)
コンボアップ 最大$1060以上節約
追加すればするほどお得になります！
NewTouchBuff Official Store
Kinco CD622-AA-000 servo drive, brand new and original in stock, 18 months warranty
Stop Overpaying for Industrial Gear! As a direct supplier, we cut out middlemen to bring you premium industrial control products at unbeatable prices—PLC modules, replacement cables, industrial fans, touch glass, and more. Our industrial-grade products reduce maintenance costs by 30%, minimize downtime by 40%, and last 2x longer than cheap alternatives. Invest once, save for years—choose cost-effective, reliable gear that keeps your factory efficient and your budget in check. Shop now and enjoy the best value for your industrial procurement!
おおよその配送期間は7月 26 から 7月 28の間です。
プライスマッチ
私たちは毎日価格を確認し、お客様に可能な限り最良の価格を提供できるよう努めています。極めて稀なケースですが、より安い価格を見つけた場合はsales@seawens.com までご連絡ください。最善を尽くしてすぐにご質問にお応えします！
まとめ買い割引
複数の電化製品や家庭用電子機器をお買い求めになる予定ですか？
2点以上の商品をまとめてご注文いただくと、特別なまとめ買い割引とカスタマイズされたパッケージ価格をご提供しています。
WhatsAppで (+86) 195 2767 5574 にお問い合わせいただくか、私たちの まとめ買い割引ページ で詳細をご確認いただき、本日でもテーラーメイドの見積もりをリクエストすることができます。
金融
ペイパルと提携しました！
ペイパルを利用する理由は？
✅安全でプライベートな環境で、銀行口座情報がしっかり保護されます
✅公式の購入者保護制度が適用され、注文が安全に守られます
✅入金が即時に行われるため、すぐに商品を発送できます
✅操作が簡単で、面倒な銀行手続きが不要です
✅TT電信送金よりもずっと速くて簡単です
仕組みはどうなっていますか？
- 商品をカートに追加する
- チェックアウト時にペイパルまたはクレジットカードを選択する
- ペイパルの手続きを完了する
- 利用可能なローンプランを比較する
配送情報
- 配送時間入金確認後、1–3営業日以内に発送いたします。在庫品は当日発送も可能です。
- 配送方法DHL、FedEx、UPS、TNT、EMSなどの国際エクスプレスを使用しています。大量注文の場合は、航空輸送と海上輸送にも対応しています。
- 配送期間
- 国際エクスプレス：ほとんどの国へ3–7営業日程度
- 航空輸送：7–15営業日程度
- 海上輸送：25–45営業日程度（発着港により異なります）
- 追跡番号発送後、すぐに追跡番号と配送リンクを送信します。いつでもオンラインで配送状況を確認できます。
- 梱包すべての商品は静電気防止袋、発泡箱、段ボールで梱包しています。専門的な耐衝撃・防湿包装で、商品が無事に到着するようにしています。
- 関税・輸入税輸入税および関税は買い手負担となります。関税を削減できるよう、適正な申告価格を設定できます。
- 配送先住所配送先の完全な住所、郵便番号、連絡先電話番号を正しくご確認ください。住所の誤りによる配送遅延については責任を負いかねます。
柔軟な配送
お客様には商品を迅速かつ効率的にお届けすることをお求めいただいていることを承知しております。そのため、NewTouchBuff.comでは、ご自宅まで直接お届けする高速かつ効率的な配送サービスを利用して可能な限り迅速に商品をお届けすることを最優先にしております。また、ほとんどの商品について配送料は無料です！
- 週7日、毎日配達を行っています
- 通常配送は専門業者を通じて発送され、通常3～5営業日以内にお届けします。
- お急ぎ便の場合、14:30以前に注文いただければその日発送し、1～2営業日以内にお届けします。
- 週末配達をご希望の場合は、金曜日14:30までに注文を手続きいただく必要があります。
- 大型商品は、全国対応の専門業者チームを使用して発送します。注文の確認と配送予定日について、48時間以内にご連絡いたします。
- メーカーやサプライヤーから直接発送する商品は、少しお時間がかかる場合がありますが、随時状況をご連絡いたします。
Focus on Reliability & Efficiency
Your Industrial Production Deserves the Best—Don’t Settle for Less!
Highly Stimulating
Hurry Up! Limited Stock Alert for Industrial Control Essentials!
Servo drive CD622-AA-000
- Supports dual pulse (CW/CCW), pulse direction (P/D) and A/B phase control
- With a variety of protective measures such as overvoltage, overcurrent, and overheating, it is safe and reliable
- Use your own operation panel or PC debugging software to easily complete debugging
- Up to 300% overload capacity
- High response frequency, speed loop bandwidth up to 600Hz
- With a variety of control modes and gain automatic adjustment functions, it meets the needs of most applications (among which CD2 also supports the following two features).
- Support dual pulse (CW/CCW) mode, pulse direction (P/D) mode and incremental encoder (AB) mode control.
- Support wide voltage input (3.3~ 24VDC).
basic parameters
| power supply | Three-phase AC380V-20/+ 15% 47~ 63Hz |
| logic power supply | 18VDC~30VDC 1A |
| Maximum continuous output current (rms) | 7A |
| Peak Current (PEAK) | 25A |
| feedback signal | 2500PPR (Incremental Differential 5V Encoder) |
| Energy consumption braking | Requires an external braking resistor (depending on the operating conditions, mainly used in sudden stops) |
| Energy consumption braking voltage absorption point | DC680V±5V |
| Overvoltage alarm voltage | DC700V±5V |
| Undervoltage alarm voltage | DC400V±5V |
| cooling method | air cooling |
| weight | 2.4kg |
| Maximum input pulse frequency | Differential transmission mode: 500KPPS, open collector transmission mode: 200KPPS |
Position control mode
| Pulse command mode | Pulse + direction, CCW + CW, A phase + B phase (5V-24V) |
| command smoothing | Low-pass filtering (internal parameter setting) |
| Advance payments increased | internal parameter setting |
| Electronic gear ratio | Set range: Gear factor: -32768~32767, Gear divider: 1~32767, 1/50≤ |
| Position loop sampling frequency | 1KHz |
| Analog input voltage range | -10V~+10V (12-bit resolution) |
| Input impedance | 200K |
Speed control mode
| Analog input sampling frequency | 4KHz |
| Command control mode | External analog instructions/internal instructions |
| command smoothing | Low-pass filtering (internal parameter setting) |
| Input voltage dead time setting | internal parameter setting |
| Input voltage offset setting | internal parameter setting |
| speed limit | internal parameter setting |
| Torque limit | Internal parameter setting/external analog command control |
| Velocity loop sampling frequency | 4KHz |
| Analog voltage input range | -10V~+10V (12-bit resolution) |
| Input impedance | 200K |
| Input sampling frequency | 4KHz |
Torque control mode
| Command control mode | External analog instructions/internal instructions |
| command smoothing | Low-pass filtering (internal parameter setting) |
| speed limit | Internal parameter setting/external analog command control |
| Input voltage dead time setting | internal parameter setting |
| Input voltage offset setting | internal parameter setting |
| current loop sampling frequency | 16KHz |
Digital input and output function
| input specification | 7 digital inputs, through the connection of the COM1 terminal, can be valid for high level (12.5~ 30V) or low level |
| input function | The functions are as follows: drive enable, drive error reset, drive operating mode control, speed loop proportional control, positive limit, negative limit, origin signal, command reverse, internal speed segment control, internal position segment control, emergency stop, start to find the origin, command activation, gear ratio switching, gain switching |
| output specification | 5 digital outputs, OUT1~ OUT4 driver capacity is 100mA, OUT5 driver capacity is 800mA, can directly drive the brake device |
| output function | Freely defined according to needs, the functions are as follows: drive ready, drive wrong, motor position to, motor zero speed, motor brake brake, motor speed to, index Z signal appears, maximum speed limit in torque mode, motor lock shaft, motor limit, origin found, multi-segment position to |
usage environment
| operating temperature | 0~40℃ |
| Storage temperature | -10℃~70℃ |
| Humidity (no condensation) | Below 90% RH |
| Protection level | IP20 |
| protection function | Overvoltage protection, undervoltage protection, motor overheating (I2T) protection, short circuit protection, driver overheating protection, etc |
| Communication interface | RS232 (Connection to PC: 2-2,3-3,5-5) |
| Installation site | Dust-free, dry, lockable (e.g. electrical cabinets) |
| Installation method | Vertical installation |
| Installation altitude | No power limit below 1000m |
| atmospheric pressure | 86kpa~106kpa |
Dimension drawing (mm)
正規品保証
当店では世界中の認定ブランドパートナーと正規小売パートナーから真正品のみを販売しています。
保守、修理、交換
$750.00 USD
Receives in 5 days.
$250.95 USD
Receives in 5 days.
$449.95 USD
Receives in 5 days.
$179.95 USD
Receives in 5 days.
$189.95 USD
Receives in 5 days.
$204.95 USD
Receives in 5 days.
$229.95 USD
Receives in 5 days.
$219.95 USD
Receives in 5 days.
Receives in 5 days.
$109.95 USD
Receives in 5 days.
Receives in 5 days.
Receives in 5 days.
- 選択するとページが完全に更新されます。
- 新しいウィンドウで開きます。